HY-LITE WATER QUALITY INDICATOR LIGHT
The Hy-Lite water quality indicators light is a low cost indicator of pure water quality for deionization, reverse osmosis, or distillation systems. Featuring exclusive Auto Temperature Compensation, the Hy-Lite is by far the most accurate “quality light” available. With remote and control capability, the Hy-Lite is also the most versatile product of its kind.
VISUAL & AUDIBLE ALARM
The Hy-Lite has green and red LEDs that continuously display water quality relative to the setpoint. When the water is “good” the green LED is illuminated. If the water purity falls below setpoint, the red LED flashes and the built-in alarm sounds. The alarm can be silenced by pressing the front label membrane switch. (also available without alarm).
The integral sensor is designed for installation in standard threaded tees. Both 1/2 inch & 3/4 inch mNPT polypropylene fittings are provided. Unit construction is of trouble free Stainless Steel and ABS.
If you need to know the water quality away from the system simply connect the Remote Alarm Module. With its own green & red LEDs, alarm, and silence switch, the alarm module duplicates the status of the connected Hy-Lite. Connection could not be easier with telephone style cable… click-click and you are done.
To rinse-up the DI tanks, control valves, connect custom alarms systems, etc., the Relay Module allows the Hy-Lite to perform as a controller. The SPDT relay features an adjustable time delay to compensate for expected system rinse-up times.
Within ±3% over a temperature range of 5-45°C
Hy-Lites are available with fixed setpoints most commonly used in two-bed and mixed-bed service DI and other applications.
25, 50, 200 and 500 kilohm-cm
1, 2, 3 and 5 megohm-cm
The Hy-Lite is powered by a plug-in style 12VDC transformer. Up to 6 Hy-Lites can be powered by a single power supply by connecting the Hy-Lites to each other making for a clean install at the wall outlet.